FAQs
- General
We offer a range of kitchen faucets including single-handle, double-handle, pull-down, pull-out, and touchless faucets.
The aerator is fitted at the end of the tap output and acts as a restrictor to reduce the flow of water by adding air. t has many small holesand over time they can become clogged with mineral deposits and sediment. This is the most likely cause of water pressure problems andthe easiest to fix.
1，Remove the aerator from the water tap.Try to unscrew it manually. This can be dificult. You may need to resort to a pair of pliers. Placeplastic tape on a grippy surface to avoid scratching the metal, or use a cloth to protect the metal.
2, If you are unable to remove the aerator, you may need to try to remove al obstructions while the aerator is stl in place. Pour the vinegarinto a plastic bag and tie it to the end of the tap for a few hours. This should help to dissolve some of the debris that is causing theproblem.
3,lf you remove the aerator, you can place it in vinegar and warm water for a few hours f it is stll clogged after this, you can try cleaning itwith a commercial lime remover. lf this is not possible, you can replace the aerator. They are not very expensive.
4, When the aerator is off, turn on the tap to determine if you have found the cause of the problem. If the pressure is stll low afterremoving the aerator, the problem must be located below the channel and you may need to call a plumber for service
5,After cleaning the aerator, rinse and tighten it again. Check the water pressure. lf you have removed the mineral deposits and sedimentthe water pressure must be restored.
6, Use the tap adaptor to change the aerator to the new fixture.
Yes, we offer customizable kitchen faucets that can be tailored to your style preferences and functional needs.
Toggle Content
- Product
After ordering through our website you will recelve an emall with your tracking number. lf you did not recelve that emall please send us oneat orders@stylishkb.com so we can send you the tracking number.
The aerator is fitted at the end of the tap output and acts as a restrictor to reduce the flow of water by adding air. t has many small holesand over time they can become clogged with mineral deposits and sediment. This is the most likely cause of water pressure problems andthe easiest to fix.
1，Remove the aerator from the water tap.Try to unscrew it manually. This can be dificult. You may need to resort to a pair of pliers. Placeplastic tape on a grippy surface to avoid scratching the metal, or use a cloth to protect the metal.
2, If you are unable to remove the aerator, you may need to try to remove al obstructions while the aerator is stl in place. Pour the vinegarinto a plastic bag and tie it to the end of the tap for a few hours. This should help to dissolve some of the debris that is causing theproblem.
3,lf you remove the aerator, you can place it in vinegar and warm water for a few hours f it is stll clogged after this, you can try cleaning itwith a commercial lime remover. lf this is not possible, you can replace the aerator. They are not very expensive.
4, When the aerator is off, turn on the tap to determine if you have found the cause of the problem. If the pressure is stll low afterremoving the aerator, the problem must be located below the channel and you may need to call a plumber for service
5,After cleaning the aerator, rinse and tighten it again. Check the water pressure. lf you have removed the mineral deposits and sedimentthe water pressure must be restored.
6, Use the tap adaptor to change the aerator to the new fixture.
- Customization
After ordering through our website you will recelve an emall with your tracking number. lf you did not recelve that emall please send us oneat orders@stylishkb.com so we can send you the tracking number.
The aerator is fitted at the end of the tap output and acts as a restrictor to reduce the flow of water by adding air. t has many small holesand over time they can become clogged with mineral deposits and sediment. This is the most likely cause of water pressure problems andthe easiest to fix.
1，Remove the aerator from the water tap.Try to unscrew it manually. This can be dificult. You may need to resort to a pair of pliers. Placeplastic tape on a grippy surface to avoid scratching the metal, or use a cloth to protect the metal.
2, If you are unable to remove the aerator, you may need to try to remove al obstructions while the aerator is stl in place. Pour the vinegarinto a plastic bag and tie it to the end of the tap for a few hours. This should help to dissolve some of the debris that is causing theproblem.
3,lf you remove the aerator, you can place it in vinegar and warm water for a few hours f it is stll clogged after this, you can try cleaning itwith a commercial lime remover. lf this is not possible, you can replace the aerator. They are not very expensive.
4, When the aerator is off, turn on the tap to determine if you have found the cause of the problem. If the pressure is stll low afterremoving the aerator, the problem must be located below the channel and you may need to call a plumber for service
5,After cleaning the aerator, rinse and tighten it again. Check the water pressure. lf you have removed the mineral deposits and sedimentthe water pressure must be restored.
6, Use the tap adaptor to change the aerator to the new fixture.
- Service
After ordering through our website you will recelve an emall with your tracking number. lf you did not recelve that emall please send us oneat orders@stylishkb.com so we can send you the tracking number.
The aerator is fitted at the end of the tap output and acts as a restrictor to reduce the flow of water by adding air. t has many small holesand over time they can become clogged with mineral deposits and sediment. This is the most likely cause of water pressure problems andthe easiest to fix.
1，Remove the aerator from the water tap.Try to unscrew it manually. This can be dificult. You may need to resort to a pair of pliers. Placeplastic tape on a grippy surface to avoid scratching the metal, or use a cloth to protect the metal.
2, If you are unable to remove the aerator, you may need to try to remove al obstructions while the aerator is stl in place. Pour the vinegarinto a plastic bag and tie it to the end of the tap for a few hours. This should help to dissolve some of the debris that is causing theproblem.
3,lf you remove the aerator, you can place it in vinegar and warm water for a few hours f it is stll clogged after this, you can try cleaning itwith a commercial lime remover. lf this is not possible, you can replace the aerator. They are not very expensive.
4, When the aerator is off, turn on the tap to determine if you have found the cause of the problem. If the pressure is stll low afterremoving the aerator, the problem must be located below the channel and you may need to call a plumber for service
5,After cleaning the aerator, rinse and tighten it again. Check the water pressure. lf you have removed the mineral deposits and sedimentthe water pressure must be restored.
6, Use the tap adaptor to change the aerator to the new fixture.
- Payment
After ordering through our website you will recelve an emall with your tracking number. lf you did not recelve that emall please send us oneat orders@stylishkb.com so we can send you the tracking number.
The aerator is fitted at the end of the tap output and acts as a restrictor to reduce the flow of water by adding air. t has many small holesand over time they can become clogged with mineral deposits and sediment. This is the most likely cause of water pressure problems andthe easiest to fix.
1，Remove the aerator from the water tap.Try to unscrew it manually. This can be dificult. You may need to resort to a pair of pliers. Placeplastic tape on a grippy surface to avoid scratching the metal, or use a cloth to protect the metal.
2, If you are unable to remove the aerator, you may need to try to remove al obstructions while the aerator is stl in place. Pour the vinegarinto a plastic bag and tie it to the end of the tap for a few hours. This should help to dissolve some of the debris that is causing theproblem.
3,lf you remove the aerator, you can place it in vinegar and warm water for a few hours f it is stll clogged after this, you can try cleaning itwith a commercial lime remover. lf this is not possible, you can replace the aerator. They are not very expensive.
4, When the aerator is off, turn on the tap to determine if you have found the cause of the problem. If the pressure is stll low afterremoving the aerator, the problem must be located below the channel and you may need to call a plumber for service
5,After cleaning the aerator, rinse and tighten it again. Check the water pressure. lf you have removed the mineral deposits and sedimentthe water pressure must be restored.
6, Use the tap adaptor to change the aerator to the new fixture.
- Shipping
After ordering through our website you will recelve an emall with your tracking number. lf you did not recelve that emall please send us oneat orders@stylishkb.com so we can send you the tracking number.
The aerator is fitted at the end of the tap output and acts as a restrictor to reduce the flow of water by adding air. t has many small holesand over time they can become clogged with mineral deposits and sediment. This is the most likely cause of water pressure problems andthe easiest to fix.
1，Remove the aerator from the water tap.Try to unscrew it manually. This can be dificult. You may need to resort to a pair of pliers. Placeplastic tape on a grippy surface to avoid scratching the metal, or use a cloth to protect the metal.
2, If you are unable to remove the aerator, you may need to try to remove al obstructions while the aerator is stl in place. Pour the vinegarinto a plastic bag and tie it to the end of the tap for a few hours. This should help to dissolve some of the debris that is causing theproblem.
3,lf you remove the aerator, you can place it in vinegar and warm water for a few hours f it is stll clogged after this, you can try cleaning itwith a commercial lime remover. lf this is not possible, you can replace the aerator. They are not very expensive.
4, When the aerator is off, turn on the tap to determine if you have found the cause of the problem. If the pressure is stll low afterremoving the aerator, the problem must be located below the channel and you may need to call a plumber for service
5,After cleaning the aerator, rinse and tighten it again. Check the water pressure. lf you have removed the mineral deposits and sedimentthe water pressure must be restored.
6, Use the tap adaptor to change the aerator to the new fixture.
Consult Your Willing Kitchen faucets Experts
We help you avoid the pitfalls to deliver the quality and value your Kichen faucet need, on time and on -budget.